Build guide

Door

Build the miniature wooden door in 5 steps. The door turns on two pins, so it opens and closes. Fits the DIY Play House.

What you build

The finished door, open

Caution: small parts. Keep them away from young children.

See the kit

Before you start

  1. Press the parts out of their frame.
  2. Fit the parts together without glue. Rubber bands hold them while you try.
  3. Take the parts apart. Then glue each joint as you fit it, and press it for a moment.
  4. Wipe off the extra glue.
  5. Do not glue the pins of the door, so that the door can turn.

Step 1

Step 1: Fit a post into one end of the bottom bar. The bar has a round hole for the pin of the door.

Fit a post into one end of the bottom bar. The bar has a round hole for the pin of the door.

Step 2

Step 2: Fit the second post into the other end of the bar.

Fit the second post into the other end of the bar.

Step 3

Step 3: Stand the door between the posts. Its bottom pin goes into the hole in the bar.

Stand the door between the posts. Its bottom pin goes into the hole in the bar.

Step 4

Step 4: Fit the top bar onto the posts. Its hole holds the top pin of the door.

Fit the top bar onto the posts. Its hole holds the top pin of the door.

Step 5

Step 5: Glue the handle onto the door.

Glue the handle onto the door.

When you finish

  1. When the glue is dry, paint the part with acrylic paint.