Build guide

Pallet

Build the miniature wooden pallet in 6 steps: the bottom boards, the rails, and then the top boards.

What you build

The finished pallet

Caution: small parts. Keep them away from young children.

Before you start

  1. Press the parts out of their frame.
  2. Fit the parts together without glue. Rubber bands hold them while you try.
  3. Take the parts apart. Then glue each joint as you fit it, and press it for a moment.
  4. Wipe off the extra glue.

Step 1

Step 1: Lay the two notched rails. Fit a board across each end.

Lay the two notched rails. Fit a board across each end.

Step 2

Step 2: Fit a board across the middle.

Fit a board across the middle.

Step 3

Step 3: Fit the other bottom boards into the slots of the rails.

Fit the other bottom boards into the slots of the rails.

Step 4

Step 4: Fit a notched rail on top of the boards, along one edge.

Fit a notched rail on top of the boards, along one edge.

Step 5

Step 5: Fit the middle rail and the last rail on top.

Fit the middle rail and the last rail on top.

Step 6

Step 6: Fit the top boards across the top rails.

Fit the top boards across the top rails.

When you finish

  1. When the glue is dry, paint the part with acrylic paint.