Build guide

Window

Build the miniature wooden window in 6 steps. The two window frames turn on pins, so they open. Fits the DIY Play House.

What you build

The finished window, with one frame open

Caution: small parts. Keep them away from young children.

See the kit

Before you start

  1. Press the parts out of their frame.
  2. Fit the parts together without glue. Rubber bands hold them while you try.
  3. Take the parts apart. Then glue each joint as you fit it, and press it for a moment.
  4. Wipe off the extra glue.
  5. Do not glue the pins of the frames, so that the frames can turn.

Step 1

Step 1: Fit a post into one end of the bottom bar.

Fit a post into one end of the bottom bar.

Step 2

Step 2: Fit the middle post into the bar.

Fit the middle post into the bar.

Step 3

Step 3: Fit the last post into the other end of the bar.

Fit the last post into the other end of the bar.

Step 4

Step 4: Stand the first window frame in its opening. Its bottom pin goes into the round hole.

Stand the first window frame in its opening. Its bottom pin goes into the round hole.

Step 5

Step 5: Stand the second window frame in the other opening.

Stand the second window frame in the other opening.

Step 6

Step 6: Fit the top bar onto the posts. Its holes hold the top pins of the frames.

Fit the top bar onto the posts. Its holes hold the top pins of the frames.

When you finish

  1. When the glue is dry, paint the part with acrylic paint.